Top Result workwear models
| Model | Article no. | Sizes | Colours | Price from (net) |
|---|---|---|---|---|
| Core Enhanced Visibility Vest | R200X (81233) | XS, S/M, L/XL, 2XL/3XL | 13 | €2.51 |
| Hi-Vis Motorway Vest | R201X (81333) | S/M, L/XL, 2XL/3XL | 2 | €3.35 |
| Printable Softshell Jacket | R231M (82833) | S–4XL | 10 | €18.48 |
| Men's Printable Softshell Bodywarmer | 84533 | S–4XL | 10 | €15.96 |
| Work-Guard LITE Trouser | R318X (91833) | XS–5XL | 3 | €25.20 (XS–2XL), 3XL–5XL €26.04 |
| Work-Guard LITE Jacket | R316X (86733) | XS–4XL | 3 | €27.72 (XS–2XL), 3XL–4XL €29.40 |
The number in brackets is our shop article number. All prices net, plus VAT, excluding finishing (the shop shows gross prices). Where two prices are shown, the difference depends on size alone — within the same size every colour costs the same.
R200X — Core Enhanced Visibility Vest
The most ordered Result vest and at the same time the least typical one: it comes in 13 colours, including White, Royal, Purple and Raspberry. EN ISO 20471:2013 class 2, however, applies only to the two fluorescent colours Orange and Yellow — the other eleven are "enhanced visibility", i.e. highly visible team vests without a certificate to the standard. If you need a compliant hi-vis vest, pick Fluo Orange or Fluo Yellow. 100 % polyester, two wide reflective strips, generous unisex cut to fit over everyday clothing.
R201X — Hi-Vis Motorway Vest
The pure compliance vest: only Fluorescent Orange and Fluorescent Yellow, but certified to EN ISO 20471:2013 class 2 in every version, with 50 mm wide reflective strips. It costs €0.84 (net) more than the R200X and is the right choice when the vest has to meet a requirement rather than just stand out — road works, traffic areas, site visitors.
R231M — Printable Softshell Jacket
280 gsm two-layer softshell in 100 % polyester with a microfleece lining, windproof and stretchy. The name says it: the outer fabric is explicitly built for printing, the finishing area on chest and back is large and the label is neutral. Full-length zip with chin guard, elastic cuffs, slim cut, washable at 60 °C. 10 two-tone combinations from Black/Black to Vivid Green/Black.
84533 — Men's Printable Softshell Bodywarmer
Same material base as the R231M — 280 gsm, two-layer, microfleece lining, elastane-free — just without sleeves and with zipped side pockets. €2.52 (net) cheaper, same 10 colour combinations, same S–4XL size range. If you want to combine jacket and bodywarmer in one look, order both models together; the colour names are identical.
R318X — Work-Guard LITE Trouser
200 gsm twill in 80 % polyester and 20 % cotton: windproof, water-repellent and breathable, and noticeably lighter than classic work trousers. Double belt loops, elastic waistband, bar tacks at the stress points and cargo pockets with reflective velcro pullers. At XS–5XL it has the widest size range in the Result workwear line.
R316X — Work-Guard LITE Jacket
The jacket that matches the LITE Trouser, made from the same 200 gsm twill and in the same three colour combinations (Grey/Black/Orange, Black/Grey/Orange, Royal/Navy/Orange) — orderable as a set. Stand-up collar with velcro, cuff with press stud, pockets with reflective pullers, bar tacks. It stops at 4XL while the trouser goes to 5XL; for mixed teams that difference is worth a look.
Which finishing fits Result workwear?
- Hi-vis vests R200X and R201X: the finishing must not reduce the certified fluorescent area below the required minimum. We therefore place logos on the chest and in the middle of the back between the reflective strips — at most 7 × 5 cm on the chest and 20 × 12 cm on the back, keeping 2 cm clear of the reflective strips (details under print hi-vis vests). Transfer printing and flex printing sit cleanly on the smooth polyester.
- Softshells R231M and 84533: the outer fabric is explicitly built for printing. For company logos, embroidery on the chest is standard; for detailed or multi-colour artwork, DTF printing; for large back prints, transfer printing with low-temperature film. We do not run classic screen printing on softshell — its curing temperature is too high. The process rules are set out under print softshell jackets.
- LITE line R318X and R316X: the polyester-cotton twill takes embroidery best, and it survives the wear and tear of a building site.
Volume discount and delivery
Our quantity tiers — apply to all Result workwear, on the price of the goods (not on printing, embroidery, set-up or digitising):
| Quantity | Discount |
|---|---|
| from 3 pcs | 3 % |
| from 20 pcs | 10 % |
| from 50 pcs | 15 % |
| from 100 pcs | 25 % |
| from 200 pcs | 30 % |
| from 500 pcs | 32 % |
- From 500 pieces — custom bulk-order via inquiry
- Shipping: €4.95, free from €100 order value within Germany
- Lead time: standard 7-10 business days incl. finishing from our Berlin workshop; express 3-5 business days, overnight 1-2 business days only for selected processes after a feasibility check — both on request. Embroidery takes longer: 8-12 business days production, 5-7 with express, plus shipping in each case; overnight is not possible for embroidery
- Blank stock without finishing: ships in 3–5 business days from the warehouse
Inspiration for your project
- All Result models on the brand hub — full range, FAQ and fabric details
- Workwear (overview) — workwear category with all brands
- Print hi-vis vests — standards, placement and prices for high visibility
- Print softshell jackets — processes for softshell and technical fabrics
- Embroidery — finishing hub with prices + use-cases
- Brands overview — all 17 brands at ShirtStore
