Versandfrei ab 100 €
    ShirtStore

    Care of Printed T-Shirts — Washing, Drying, Ironing

    You have freshly printed shirts in hand and want the print to look new even after 50 washes? With proper care that's achievable. Here is how to wash screen print, DTG, DTF, embroidery and flex print so they last — and which common mistakes kill the print.

    First wash — the most important cycle

    Always wash printed shirts once before first wear. Reasons: residual dye is rinsed out, the print "sets", and sweat marks on an unwashed shirt look worse than on a washed one.

    Rule of thumb for the first wash:

    • 30°C cool, separately or with similar colours
    • Turn inside out
    • Gentle or delicate cycle
    • No tumble dryer, no fabric softener

    After that you can gradually move to normal washing — see methods below.

    Wash instructions per finishing

    Screen printing — the robust one

    Screen printing is mechanically very resistant. Still:

    • 30-40°C, wash inside out
    • Tumble dryer: yes, low setting
    • Iron: only on fabric (not on print), inside out
    • Lifetime: 100+ washes without visible wear

    Digital print (DTG) — the photo-realistic one

    DTG prints are a little more sensitive, especially for the first 5 washes.

    • 30°C, wash inside out
    • Tumble dryer: rather air dry or low setting
    • Iron: not directly on print, always with cloth or inside out
    • Lifetime: 50-80 washes depending on care

    Embroidery — the premium one

    Embroidery wears almost not at all from washing, but rather from friction.

    • 30-60°C possible
    • Wash inside out to protect against pilling
    • Tumble dryer: yes, low setting
    • Don't iron directly on embroidery — lifts the threads
    • Lifetime: 200+ washes

    DTF (Direct to Film) — the versatile one

    DTF is very flexible and good with cool washing.

    • 30°C, wash inside out
    • Tumble dryer: low setting or air dry
    • Iron: inside out only, cloth in between
    • Lifetime: 60-80 washes

    Flex/flock print — the smooth one

    Flex print is a thin foil application and a little sensitive to heat.

    • Maximum 30°C
    • Wash inside out compulsory
    • Tumble dryer: no, air dry
    • Iron: never directly on print — foil melts
    • Lifetime: 40-60 washes

    Temperature recommendations — quick overview

    • 30°C cool: First wash for all methods, standard for DTG and flex
    • 40°C warm: Screen print, DTF, embroidery
    • 60°C hot: Embroidery on workwear (e.g. chef's jackets). For prints only exceptionally and only with very robust methods

    Tumble dryer yes or no?

    Method Tumble dryer
    Screen print Yes, low
    Digital print (DTG) Rather air
    DTF Yes, low
    Embroidery Yes, low
    Flex print No, air

    Generally: air drying is always gentler and extends lifetime. If you need the dryer — low setting and shirt inside out.

    Ironing — the golden rule

    Never iron directly on the print. Always from the inside (inside out) or with a thin cotton cloth in between. The heat from the iron can soften prints and at worst stick or burn them. Embroidery is more robust, but direct contact flattens the threads.

    For functional fabrics: low setting, no steam, always inside out.


    Need long-lasting printed textiles for your order?

    Request finishing → · Open configurator →


    Häufige Fragen

    Why is my print cracked after 3 washes?

    Possible causes: washed too hot, dryer on high setting, fabric softener used, or ironed directly on the print. With DTG and flex print these are the most common mistakes. Tip: handle the first 5 washes very gently, then the print sets.

    Can I wash printed shirts at 60°C?

    Only with robust methods like screen printing and embroidery. With DTG, DTF and flex stay at 30-40°C. Hot washing can change the print film and lead to cracking.

    Can I use fabric softener?

    We don't recommend it. Softener forms a film on the print and can weaken adhesion. With embroidery less critical but still unnecessary.

    What if the print is sticky after washing?

    Usually too hot in the dryer. Let the shirt cool down completely — often the stickiness goes away with cooling. If not, the print film is damaged. Check warranty claim.

    Can I take printed shirts to dry cleaning?

    Better not. Solvents can attack print films. Embroidery is mostly uncritical. When in doubt: ask the cleaner first or check with the manufacturer.

    How do I wash functional fabrics with a print?

    With sports detergent (no general purpose), 30°C, inside out, no dryer, no softener. Breathability stays intact and the print is protected.

    Print sticks to the drum after washing — what to do?

    Rare — happens with damaged prints. Take out immediately, ventilate, file warranty claim. Don't pull or rub — that destroys the print.

    Are GOTS organic shirts easier to care for?

    Not necessarily. Organic cotton reacts similarly to conventional. More important is the print method and care discipline.

    Request finishingOpen configurator